CSF Series: Multi-tubular Filter integrates tubular filter elements inside. When differential pressure reaches the preset pressure after filtration, the liquid in the filter is discharged and the back-blowing fluid removes the filter cake, then filter elements are cleaned for the filtration next time.

CSF Filter has the outstanding following features: wide application, close operation, multi-function, large filter area, high dirt holding capacity, easy to back-blow the filter cake off and automatic running. Usually CSF filter system runs continuously by consisting two filters (one filtering and the other one standby) and has PLC control system, which can automatically carry out precoating, filtering, discharging, cleaning and other procedures. More

CSF Filter unit can be integrated into a larger filter system. Five kinds of filter elements are available: V-slot slotted, metal-powdersintered, woven cloth, metal-mesh-sintered and polymer membrane. They can meet various special filtration requirements. If as the precoat filter, the optional precoated medias is diatomite, perlite, cellulose etc..


Features& Benefits
■ Applicable industries: Petro-chemical, beverage, fine chemicals, oil, water treatment, titanium dioxide etc.
■ Applicable liquids: Resins, polyethylene glycol, polybutylene resins, alkyd resins, epoxy resin, beer, edible oils and fats, sodium alginate, citric acid, gelatin, bone glue, wax regeneration, cutting oil, fuel oil, lubricating oil , machine cooling oil, transformer oil, metal foil rolling oil etc.
■ Filtration function: Direct filtration, precoat filtration, slurry concentration, filter cake recycling and washing. 
■ Filtration type: Direct filtration or pre-coated filter, back blow remove filter cake.

Main Specification
■ Housing Diameter(mm): 300-2400
■ Filtration rating (μm): 0.5-600
■ Filter Area (m2): 0.2669/0.314
■ Housing Material: 304,316L,CS
■ Applicable Viscosity (cp): 1-2000
■ Temperature (℃): 200
■ Design pressure (MPa): 0.6,1.0
■ Jacket: An external metal jacket placed over the filter housing and filled with hot oil (0.2MPa) or water (0.4MPa) to maintain product temperature